TUB RACK FOR FORD RANGER PX PX2 PX3 2012-22 HALF HEIGHT WITH BRAKE AND LED LIGHTS FOR DUAL CAB & SINGLE CAB UTE

Tub Rack FORD RANGER PX PX2 PX3 with inbuilt brake & led lights - Half Height. Now your roof top tent or tub rack load won't obstructed your 3rd brake light.

Will also fit Wildtrak 2015-21 but you will need to trim the cross bar we supply by approx 80mm to fit within the abs sail plane. Load rating when installed on a roller shutter is limited to the load rating of your roller shutter.

Ultrex half height Tub Racks are an essential 4x4 accessory for single and dual cab utes.  Don’t spend hundreds of dollars more on similar Tub Racks - Ultrex Tub Racks offer the best quality and value, PLUS they are engineered for our harsh Australian conditions.

Our Tub Racks are built TOUGH to handle all your offroad or outback adventures!  These Half Height Tub Racks customise your vehicle’s appearance and enable flexible tub usage for your on/off-road touring.

With our Tub Racks, you can install a roof top tent or awning, or carry essential spares such as extra fuel, spare wheels, work gear/tool kits and recovery gear, all while maintaining the use of your tub. Simple DIY installation using basic hand tools.

These racks are designed to be bolted directly in to the ute tub using the provided nuts and bolts. They can also be fitted to ute's with roller shutters as these tub racks have flat feet however bolts to secure them to the roller shutter are not supplied. Load capacity when fitted to a roller shutter is limited to the load capacity of the roller shutter. The tub racks wont fit ute's with any sports bar - removal of sports bar is required to install them. No install instructions are included.

Static load rating: 400kg*

Brake Light
2 x high quality LED reverse lights or work lights (others charge extra)
3mm thick steel in matt black powder coat finish
Rack length: 124cm**
Rack width: 145cm-180**cm
Max.height: 35cm**
Min. height: 26cm** (can go as low as 21cm but drilling is required)
Adjustment hole spacing: 5cm*
Lower arm adjustment holes: 3
Upper arm adjustment holes: 3

* Load rating dependent on evenly distributed load, when correctly installed using the supplied hardware at non-maximum height. Load rating slightly diminished at maximum height.

** all dimensions are approximate